Commercial Biomass - MOD

1MW Endress Biomass Boiler In Cumbria

4* SERVICE CONTRACT

SECTOR: MINISTRY OF DEFENCE
BOILER: ENDRESS VRS-W
BOILER SIZE: 1MW
FUEL TYPE: WET WOOD CHIP
FUEL STORE: 0x4 WALKING FLOOR
LOCATION(S): CUMBRIA
CONTRACT:
  • REFRACTORY LINING
  • COMBUSTION BRICKS
  • ASH AUGER
MOD Endress

Project Solution

Our biomass service engineer visited the site to strip out the damaged refractory lining and the damaged as auger.

New steel refractory anchors were installed, the refractory concrete was cast, and new combustion bricks put into place.

The boiler was then brought to temperature following our post-repair temperature raising procedure to allow for refractory curing.

environmental-policy

Client Challenges

The client had been let down by their previous biomass service provider, so they turned to Myriad Plantroom Services for urgent support to get their Endress biomass boiler back up to full and efficient operation.

Problems

  • The refractory lining of the Endress boiler had become damaged during operation.
  • The ash auger was also damaged beyond repair.

Services Rendered in This Project

Whilst most Ariterm biomass heating systems are custom installations, there are some standardised products that we regularly take care of for our clients. Here are the popular Ariterm biomass boiler models.

Biomass Services

  • Remote Technical Support
  • Complete 65-part boiler health check
  • Tailored Service & Maintenance
  • Spares & Consumables
  • 24/7 Emergency Response
  • Fuel Supply & Management
  • Boiler Performance Optimisation

Plantroom Services

  • Oil, LPG & Gas Systems
  • Repair, Upgrade & Refurbishment
  • Condition & Operation Report
  • Pump sets & Controls
  • Project and M&E Services
  • Water Sampling

Business Services

  • RHI Protection
  • Boiler Buy Back
  • Site Training
  • Asset Assessment
  • Project Management
  • SMS Text Monitoring
district heating 1
district heating 2
district heating 1
district heating 2
waste-wood-legislative-framework-img

Download Our Technical Update

Download Previous Updates:

News

feature image
PV installation on 10x Academy Schools
by Paul Clark, October 28 2023
Myriad Heat & Power Products Ltd have completed the final commissioning of all 10 schools for an Academy Trust with schools accross the UK. ...
feature image
896kW PV installation on industrial site
by Paul Clark, September 21 2023
Myriad Heat & Power Products Ltd have completed the final commissioning of 896kW roof mounted PV system. The client has a number of large...
feature image
190kW PV installation on wood product manufacturing site
by Paul Clark, August 20 2023
Myriad Heat & Power Products Ltd have completed the final commissioning of 166kW roof mounted PV system. The client is a manufacturer of...